Home > High Purified EDI Module >

High Purified EDI Module Ultrapure Water Module For Semiconductor Power Industries

Product Categories

Hot Water Sanitizable EDI Module [4]
High Temperature EDI Module [4]
Ultrapure Water EDI Module [4]
Dedicated EDI Module [4]
Laboratory EDI Module [1]
Low Flow Rate Module [1]
Large Flow Rate Module [1]
UPW Integrated System [1]
High Purified EDI Module [1]

Aquacells Membrane Technologies Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

High Purified EDI Module Ultrapure Water Module For Semiconductor Power Industries

Name: High Purified EDI Module Ultrapure Water Module For Semiconductor Power Industries
Brand: Aquacells
Price: 1 USD

Material : High-grade polymer and ion exchange membranes

Purification level : High

Technology type : Electrodeionization (EDI)

Voltage : 12-48 V DC

Flow rate : Variable (e.g., 1-10 m³/h)

Resin type : Mixed bed ion exchange resin

Recovery rate : ≥90%

Module dimensions : Customizable or standard sizes

Brand Name : Aquacells

Operating pressure : 0.1-0.6 MPa

Current density : 5-30 mA/cm²

Water quality output : Resistivity ≥ 15 MΩ·cm

Product name : High Purified EDI Module

Place of Origin : China

Application : Water purification

Certification : FDA，EU，CE，RoHS，REACH

Model Number : EIMD-DI

Operating temperature : 5-45 °C

Maintenance interval : 12-24 months

Contact Now

EIMD - UP Ultrapure Water Module With >16MΩ*Cm Resistivity 90-99% Silica Removal And 90-95% Recovery For Semiconductor And Power Industries

Aquacells EIMD-UP module are designed for ultrapure water applications,with a primary focus on meeting the high-standard water quality requirements of the semiconductor and pharmaceutical industries.

Feed Water Specifications

Parameter	Specification
FCE (including CO₂ and Silica)	< 45 µS/cm
Temperature	5-45 ℃ (40-113 ℉)
Feed pressure	1.4-7 bar (20-100 psi)
Total Chlorine (as CI₂)	<0.05 ppm
Fe	<0.01 ppm
Mn	<0.01 ppm
S^2-	<0.01 ppm
pH	4-11
Total Hardness (as CaCO₃)	<1.0ppm
Dissolved Organics (TOC as C)	<0.5ppm
Silica (SiO₂)	<1.0ppm

Typical Module Performance

Parameter	Specification
Typical Recovery	90-95%
Maximum Feed Pressure	7 bar (100 psi)
Maximum Feed Temperature	45 ℃ (113 ℉)
DC Voltage*	0-300 V
DC Amperage	0-6 A
Product Resistivity	>16 MΩ·cm
Silica (SiO₂) Removal	90-99% depending on feed water

*Voltage required depends on module size

The information provided in this brochure contains general descriptions or performance characteristics that may not always apply as described in actual use cases or may change due to further product development. An obligation to provide the respective characteristics shall only exist if expressly agreed upon in the terms of the contract.

Product Tags:

High Purified EDI Module Ultrapure Water Module For Semiconductor Power Industries Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Aquacells Membrane Technologies Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

High Purified EDI Module Ultrapure Water Module For Semiconductor Power Industries

High Purified EDI Module Ultrapure Water Module For Semiconductor Power Industries

High Purified EDI Module

Ultrapure Water EDI Module

Semiconductor Ultrapure Water Module

High Purified EDI Module Ultrapure Water Module For Semiconductor Power Industries Images